UV lash glue cures with light instead of with moisture in the air. In this free course you will learn how the system works, which eye-safety precautions are essential, what equipment you need, how to work step by step with the UV LED lamp and UV glue, and how to remove the extensions. Always follow your lamp and glue manuals.
What you will learn
- How UV glue cures compared with cyanoacrylate
- Protecting your client's eyes and your own
- Setting up the lamp, foot pedal and glue
- Applying and curing step by step
- Removal, equipment care and avoiding mistakes
Supplies you need
Course modules
- Module 1: What the UV/LED Lash Adhesive System Is — What a UV/LED lash system is, how photoinitiator adhesives cure with light compared with moisture-cured cyanoacrylate, and the advantages and limitations sources describe.
- Module 2: Safety: UV Light, Eyes and Acrylate Allergy — What the WHO, Finland's radiation authority STUK and the dermatology literature say about UV light and acrylates, and how to protect your client's eyes and your own.
- Module 3: Equipment and Setting Up Your UV Lamp — The kit for a UV station, the technical data you need before using a lamp, manufacturers' distances and times (never borrowed from another brand) and how to store UV glue.
- Module 4: Step-by-Step Application with UV Glue — The full UV adhesive procedure: prep with eye protection, isolation, placement, bond-by-bond curing organised by zones and the final check.
- Module 5: Removal, Common Mistakes, Maintenance and Aftercare — Which remover to use on UV glue according to manufacturers, safe removal step by step, a fault-finding table, lamp maintenance and client aftercare.
Important: This course is free, educational and informative. It does not replace hands-on training with a qualified trainer and does not award any certificate. Always follow each product manufacturer’s instructions.